i-Vu® Integration Support
Lighting Control Panel > Mezon®
Mezon® Series UL Listed, lighting control panels provide the capability to control high voltage lighting circuits via i-Vu network, occupancy sensors, light level sensors, momentary override switches, and other input devices. Lumisys manufactured lighting relay panels integrate with i-Vu ; reducing frustration for the building engineer by eliminating the need to learn to operate and maintain a separate lighting control system.
Qwik-Kit® Pros replace the exiting lighting control panel electronics. All existing line voltage wiring, relays, power supply, enclosure and low voltage wiring remain in place thereby substantially reducing the cost of conversion and i-Vu integration while leveraging the initial investment in the original lighting panels. After replacing the electronics the low voltage relay termination can be made to the Relay Interface Board (RIB) and the low voltage switches can be terminated on the controller inputs.
The BACnet Telephone Override Module (BTOM) provides building occupants the ability to override lighting, HVAC or both from any touch-tone telephone. The BTOM provides human voice prompting that informs the caller what information is required to be entered via the telephone keypad. The factory default voice prompts are recorded in English and can be recorded in any language through the local program port.
Architectural Dimming > IMMIX™
IMMIX™ is an integrated, distributed architectural dimming solution that is suitable for new or retrofit installations including; conference centers, ballrooms, boardrooms and other architectural dimming applications. By mixing four basic system elements; master control station, remote station, power booster and integration module, IMMIX is able to perform traditional dimming system functions while being supervised from i-Vu .
Digital Switches and Inputs Module > Digi-Touch®
Digi-Touch® improves the functionality of Lumisys Mezon panels or Qwik- Kits by providing the capability of networking digital switches and occupancy sensors over a single twisted pair of wires. This twisted pair network is the Lumisys Digi-Touch Network. The idea is that more devices on the digital subnet and serve them with a higher throughput all while maintaining soft configurability as an integral part i-Vu .
LVS is a low voltage push-button switch used for controlling lighting with Lumisys lighting control panels. The buttons on this durable switch register a solid, audible click when pressed and is designed to fit in a decora-style cover plate.
LS5 light level sensors are three-wire, 0 to 5VDC, linear photodiodes that are specifically designed to connect directly to Lumisys Mezon panels or Qwik- Kits without any additional hardware or power supplies. The Lumisys Lx5 controller provides power and monitors the LS5 light level via a three wire connection.
Occupancy sensing provides automatic on/off control so that lights are not being used when the room is unoccupied. Occupancy sensors pick up movement or sounds by occupants when the space is in use and turn the lights on. When the space is unoccupied, they turn the lights off.In rooms where the lights are frequently left on, or where rooms are left unoccupied for large periods during the day or night, an occupancy sensor can cut lighting costs by as much as 50%. For occupancy sensors, two technologies dominate: infrared and ultrasonic.
Lumisys BACnet Upgrades (BUG) are designed to extend the life of Lumisys or legacy TRIATEK Lighting products installed in the field. BUG deliver tremendous value by refreshing and upgrading the control technology of the existing Lumisys or TRIATEK Lighting relay panels and enable the support i-Vu Integration.
